Volume 13, Issue 1 (3-2023)
J Health Saf Work 2023, 13(1): 60-76 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Mohammadfam I. Developing a Method for Evaluating Workplace Accidents: Fault Analysis Method (FAM). J Health Saf Work 2023; 13 (1) :60-76
URL: http://jhsw.tums.ac.ir/article-1-6803-en.html
URL: http://jhsw.tums.ac.ir/article-1-6803-en.html
Department of Health, Safety and Environment Management, School of health, Occupational Health and Safety Research Center, School of Health, Hamadan University of Medical Sciences, Hamadan, Iran , mohammadfam@umsha.ac.ir
Abstract: (1111 Views)
Introduction: Occupational accidents are one of the most important risk factors for developing countries. In addition to designing preventive measures to prevent accidents, comprehensive research of accidents is considered as an undeniable necessity to reduce the risk of accidents. Thus, the first step is to find the root causes of their occurrence, which will certainly be possible with the use of appropriate techniques.
Material and Methods: In this study, first, the appropriate criteria for designing the accident analysis method were collected. In the second step, commonly used techniques were collected through known databases. In the third step, the collected techniques were scaled based on the selected criteria using the TOPSIS method, and ultimately, the new method (FAM) was developed. Finally, by analyzing three different accidents with the developed technique and four other common techniques, as well as using the ANP method, the developed technique was tested and confirmed.
Results: Based on the studies conducted to identify appropriate criteria for comparing accident analysis techniques, finally 6 criteria were selected for to be used in the study process. According to the findings, the FAM method with a normal final weight of 0.2684 was considered the priority in occupational accident analysis.
Conclusion: The output of this study was the introduction of the FAM technique. Using the strengths of the four techniques and covering their weaknesses, this technique can help identify and determine the causes of accidents graphically, systematically, and by minimizing the work attitude of analysts at three levels.
Material and Methods: In this study, first, the appropriate criteria for designing the accident analysis method were collected. In the second step, commonly used techniques were collected through known databases. In the third step, the collected techniques were scaled based on the selected criteria using the TOPSIS method, and ultimately, the new method (FAM) was developed. Finally, by analyzing three different accidents with the developed technique and four other common techniques, as well as using the ANP method, the developed technique was tested and confirmed.
Results: Based on the studies conducted to identify appropriate criteria for comparing accident analysis techniques, finally 6 criteria were selected for to be used in the study process. According to the findings, the FAM method with a normal final weight of 0.2684 was considered the priority in occupational accident analysis.
Conclusion: The output of this study was the introduction of the FAM technique. Using the strengths of the four techniques and covering their weaknesses, this technique can help identify and determine the causes of accidents graphically, systematically, and by minimizing the work attitude of analysts at three levels.
Type of Study: Research |
Received: 2023/03/13 | Accepted: 2023/03/30 | Published: 2023/03/30
Received: 2023/03/13 | Accepted: 2023/03/30 | Published: 2023/03/30
Send email to the article author
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
