Showing 5 results for Shamsipour
Hamid Reza Heidari, Farideh Golbabaei, Shahram Arsang Jang, Ali Akbar Shamsipour,
Volume 6, Issue 3 (9-2016)
Abstract
Introduction: Regarding development of several thermal indices and limitations of each, in this research applicability and validity of temperature- humidity index (Humidex) were examined against the standard heat index, Wet Bulb Globe Temperature -WBGT, as well as tympanic temperature of subjects.
Material and Method: This cross-sectional study was done on 163 subjects at spring and summer (2013) in outdoor jobs of arid and semi-arid climates of Iran. Environmental parameters as well as tympanic temperature of subjects were measured simultaneously and then heat indices were determined. Data were analyzed using linear correlation charts and Kappa coefficient of agreement by means of SPSS software version 20.
Result: A strong correlation was obtained between WBGT and Humidex in both arid and semi-arid regions (r>0.98), while the correlation between Humidex and tympanic temperature was moderate (r=0.5-0.8). Based on the obtained Kappa value, the agreement coefficient between Humidex and WBGT was 0.878. This value was obtained equal to 0.226 for the Humidex and tympanic temperature.
Conclusion: The results of this study showed that Humidex can be applied as an appropriate substitute for the WBGT index. However, if evaluation of environmental condition with low air temperature or very hot situation is considered, relying only on the Humidex results will not provide a realistic estimation of thermal strain imposed to individuals.
Mahdi Asghari, Parvin Nassiri, Mohammad Reza Monazzam, Farideh Golbabaei, Hossein Arabalibeik, Ali Akbar Shamsipour, Armin Allahverdy,
Volume 7, Issue 1 (4-2017)
Abstract
Introduction: To evaluate heat stress in the workplace different indices are used. But, none of these measures have been widely accepted. The aim of this study was to determine effective criteria in selecting a heat stress index and weighting of these criteria.
Material and Method: This study is a qualitative study that was designed and conducted within 10 stages. In the current study, effective criteria for choosing a heat stress index was determined by using Delphi technique and expert’s opinions (30 people), and then the fuzzy analytic hierarchy process was used for weighting and prioritization of these criteria.
Results: Analyzing the completed questionnaires by the experts and according to the percentage of respondents, 11 criteria were finally selected. “Simplicity” criteria by %76.6 had the highest percentage of response. But, the relative weight of this criteria was 0.041, and had the lowest weight after the “low cost” criteria. The criteria relating to the “Standard” item was 0.141as the highest relative weight.
Conclusion: It can be concluded that the first step to have a reliable and accurate measurement is to choose a proper and correct index. Based on specialists and expert’s opinions, standardization of the index is the most important selection criteria. Other criteria that must be considered were accuracy, reliability and good correlation with the physiological strain indices.
Parvin Nassiri, Mohammad Reza Monazzam, Farideh Golbabaei, Aliakbar Shamsipour, Hossein Arabalibeik, Marzieh Abbasinia, Masoumeh Chavoshi, Mehdi Asghari,
Volume 7, Issue 2 (6-2017)
Abstract
Introduction: Heat stress is caused by many factors such as individual factors, environmental factors, and management factors. Individual risk factors can decrease the heat tolerance, and play an important role in heat stress disorders incidence. The aim of this study was to review individual parameters influencing the thermal stress and review the preceding studies.
Material and Method: In this review study sites such as Web of Science, Scopus, Pubmed, Iran Medex, Magiran, Google Scholar and SID databases were used for search. The keywords included heat stress, personal factors and heat exposure. The period of 1995 to 2015 was investigated, and finally 75 original articles were identified.
Result: At the individual level, exposure with a single risk factor may reduce the workers’ heat tolerance; while exposure with a combination of several risk factors probably synergistically increases the risk of heat-related disorders. Individual risk factors include age, gender, obesity, fatigue, race, and previous heat disorders and dehydration. In addition, some diseases (such as cardiovascular disease, diabetes and infectious diseases) or use of certain drugs or alcohol can reduce the heat tolerance.
Conclusion: It is necessary to pay attention to the mentioned items when selecting workers in the hot environments. Also, due to the lack of awareness and knowledge of workers, it is necessary to provide appropriate training programs to reduce the effects of heat stress.
Milad Abbasi, Mohammad Reza Monazzam, Mansour Shamsipour, Hossein Arabalibeik,
Volume 11, Issue 4 (12-2021)
Abstract
Introduction: There are several generic and specific models to assess the individual job performance (IJP). While these methods may provide the valuable information, none of them cover the complexity and wide range of the behaviors which express the IJP. This review study aimed to identify all existing models and incorporate them to achieve a comprehensive conceptual model to assess the IJP.
Material and Methods: Databases such as PubMed, Scopus, Embase, and ProQuest were systematically searched to meet the study’s goals. Moreover, references to relevant publications were examined. Finally, suitable publications were discovered and analyzed using the inclusion and exclusion criteria.
Results: The results of Search in databases, including PubMed, Scopus, Embase, and ProQuest, showed that 12754 articles were found in the initial search. After removing duplicate and unrelated articles, finally, 155 eligible articles were selected. Based on full-text screening, 10 studies were excluded, and 5 studies were not accessible. Finally, by checking the references mentioned in the selected articles, 4 more eligible articles which were not retrieved in the search strategy were added; finally, 61 articles were selected to be reviewed. Ninteen articles were related to the general models, and 19 articles addressed job-specific assessment models. The remaining 23 articles described other existing models.
Conclusion: To evaluate IJP, a heuristic structure was developed based on the literature research. These dimensions were selected because they can accommodate all of the preceding models’ dimensions. They also include any behaviors that may have an impact on IJP.
Ehsan Garosi, Adel Mazloumi, Amir Homayoun Jafari, Ahmadreza Keihani, Ali Sharifnezhad, Mansour Shamsipour, Ramin Kordi,
Volume 12, Issue 2 (6-2022)
Abstract
Introduction: The use of exoskeletons as a new ergonomics intervention to reduce musculoskeletal disorders risk factors and increase human performance has emerged in the fourth-generation industrial revolution. The aim of this study was to assess the cervical exoskeleton effect on the neck and shoulder muscles electrical activity.
Material and Methods: In this experimental study, 14 male participants were asked to perform the simulated overhead work with and without using the cervical exoskeleton at two neck postural angles randomly. During the task, electromyography of the target muscles in the neck and shoulders was recorded. In addition, at the end of each task, participants completed a perceived discomfort questionnaire. Electromyographic signals were processed with Matlab 2017b software and the level of the electrical activity of the target muscles was normalized to the maximum muscle activity. Data analysis was performed using Random intercept mix model in STATA 14 software.
Results: Mean perceived discomfort in the neck and shoulders regions significantly reduced by the exoskeleton device, but there was no statistically significant difference in other areas. Also, the mean activity level of sternocleidomastoid and splenius capitis muscles on the right and left was significantly decreased during the use of the cervical exoskeleton. However, this difference showed a significant increase in trapezius muscles.
Conclusion: The use of the neck exoskeleton was associated with a reduction of muscle electrical activity and the perceived discomfort in the neck area. These results may be related to transferring neck and head weight by the exoskeleton retaining jack during the neck extension to other areas of the body. The exoskeleton design did not provide support for the shoulder and arm area, which explains the reason for the non-significant results in the shoulder area. Using the exoskeleton with the additional support in shoulder area could be considered as an ergonomic intervention in such overhead works.
